Zero88 Solution XL Instruction Manual download pdf (Page 101)

Memories

Solution & Solution XL Operating Manual – Issue 1.0 Page 101

Inserting Memories

The Solution & Solution XL desk provides the facility to insert up to a

maximum of 99 point memories between two whole number memories.

The point memories are referenced using decimal notation. For example,

the point memories that could be inserted between memory numbers 3 and 4

would be 3.01, 3.02 … 3.09, 3.1, 3.11, 3.12 … 3.19, 3.2, 3.21 … 3.29, 3.3 ….

3.9, 3.91, 3.92 … 3.99.

Memories are inserted one at a time and can only be inserted after a selected

memory. The desk displays the insert numbers available with a mid point one

selected by default. You can choose the default one or select one of the other

available insert numbers.

Example 1: Memories 3 and 4 have been programmed. Select memory 3 and

press the INSERT key. The Memories screen displays insert memory

numbers 3.1, 3.2, 3.3, 3.4, 3.5, 3.6, 3.7, 3.8 and 3.9 with 3.5 selected as the

default. You can then set up dimmer and fixture parameter values and

program memory 3.5 or select one of the other insert options and program

that. Once the insert memory has been programmed, the Memories screen

only displays the programmed memories, ie 3, 3.5 and 4.

Example 2: Memories 3, 3.5 and 4 have been programmed. Select memory

3.5 and press the INSERT key. The Memories screen displays insert memory

numbers 3.6, 3.7, 3.8 and 3.9 with 3.7 selected as the default. You can then

set up dimmer and fixture parameter values and program memory 3.7 or

select one of the other insert options and program that. Once the insert

memory has been programmed, the Memories screen only displays the

programmed memories, ie 3, 3.5, 3.7, 4.

Example 3: Memories 3 and 4 have been programmed. Select memory 3 and

press the INSERT key. The Memories screen displays insert memory

numbers 3.1, 3.2, 3.3, 3.4, 3.5, 3.6, 3.7, 3.8 and 3.9 with 3.5 selected as the

default. Press the INSERT key again. The Memories screen displays insert

memory numbers 3.51, 3.52, 3.53, 3.54, 3.55, 3.56, 3.57, 3.58 and 3.59 with

3.55 selected as the default.

Notes - Inserting Memories

A memory cannot be inserted in the following places:

Between a whole number memory and its first insert (eg 2 and 2.01)

Between two consecutive insert memories (eg 3.47 and 3.48).

Between the last insert and the next whole number memory (eg 7.99 and

If any of the above illegal inserts are attempted, an error message is

displayed on the Main LCD and monitor.

Transferring Memories

The Solution & Solution XL desk provides the facility to transfer a single

programmed memory or a range of programmed memories onto a submaster.

Press the MEMORIES key to display the Memories Window on the Main LCD

and monitor. Select the single memory or the first memory in the range to be

transferred. Hold down the SHIFT key and press the COPY key. The Transfer

Memory window is displayed on the Main LCD and monitor:

Figure 82 - Transfer Memory

1 2 ... 96 97 98 99 100 101 102 103 104 105 106 ... 159 160

Comments to this Manuals

No comments

Zero88 Solution XL Instruction Manual Page 101

Comments to this Manuals

Related products and manuals for Recording Equipment Zero88 Solution XL