Zero88 Solution XL Instruction Manual download pdf (Page 107)

Submasters

Solution & Solution XL Operating Manual – Issue 1.0 Page 107

Submasters

Introduction

The Solution desk has 20 pages of 10 submasters.

The Solution XL desk has 20 pages of 30 submasters.

Submasters may be programmed directly with a scene or chase.

Submasters may also be programmed by transferring a single scene or chase

memory or a range of programmed memories.

Submaster Data

Each programmed submaster contains the following data:

 Number – Submasters are referenced by page and submaster number,

eg 1-1, 1-2.

 Name – User defined name (optional) for directly programmed

submasters. For a submaster with a transferred memory, the memory

name is used. For a submaster with a transferred range of memories the

memory range is displayed (eg Range 40-60).

 Fade Times – Each submaster has a set of fade times which are applied

to the data programmed in the submaster when the submaster fader is

raised. The following times are provided with each submaster and may

be left at their default values, as defined in Setup, or adjusted as required:

o Intensity Fade Up and Fade Down.

o Colour Colour Fade.

o Beamshape Beamshape Fade.

o Position Position Fade.

 Flash Button Action – Defines the action of the flash button below the

submaster fader. Flash, Solo, Latch, Go or Off.

 LTP Trigger Level – The point at which the LTP channels programmed in

the submaster are triggered as the submaster fader is raised (0-100%).

 Chase Modifers – If the submaster is programmed directly with a chase

or contains a transferred chase memory, there are a number of modifiers

which determine how the chase runs when output – see Memories

chapter for further details.

Submasters Window

Press the SUBMASTERS key to display the Submasters Window on the Main

LCD and monitor screen. The Submasters Window on the monitor shows the

data for the sumasters on the current page, as indicated by the seven

segment display on the front panel. Each line in the window displays the data

for a single submaster, for example:

Figure 87 - Submasters Window

1 2 ... 102 103 104 105 106 107 108 109 110 111 112 ... 159 160

No comments

Zero88 Solution XL Instruction Manual Page 107