Zero88 FROG 2 Instruction Manual download pdf (Page 101)

Memories

Leap Frog 48/96 Operating Manual – Issue 3 Page 101

The Memory Setup Window

The Memory Setup Window allows you to do the following:

• Change the memory trigger, wait time or timecode, if appropriate.

• Jump to a specified memory after the current one.

• Run a macro when the memory is triggered.

• Adjust the modifiers for a chase memory.

The data that is editable via the Memory Setup Window is displayed in the Comments field

of the Memories Window.

To display the Memory Setup Window on the monitor and change the MFKs to display the

memory setup options – hold down the SETUP key and press the MEMORIES key.

The actual options presented are dependent on the memory type and current settings.

Use the MFKs or options in the popup window on the monitor to select the fields to edit

and adjust options or values as required.

Memory Trigger and Timecode

Select the [Trigger] option, then select the required memory trigger (Go, Auto, Real Time,

SMPTE or MIDI).

If the Trigger is set to Auto – select the [Trigger Timecode] option and enter the required

Wait time, for example:

If the Trigger is set to Real Time – select the [Trigger Timecode] option and enter the

required Real Time Trigger.

If the Trigger is set to SMPTE – select the [Trigger Timecode] option and enter the

required SMPTE Timecode.

If the Trigger is set to MIDI – select the [Trigger Timecode] option and enter the required

MIDI Timecode.

1 2 ... 96 97 98 99 100 101 102 103 104 105 106 ... 173 174

No comments

Zero88 FROG 2 Instruction Manual Page 101