Zero88 FROG 2 Instruction Manual download pdf (Page 80)

Preset Operation

Page 80 Leap Frog 48/96 Operating Manual – Issue 3

Two Preset Operation

Ensure that the GRAND MASTER fader is at full and BLACKOUT is off.

Set the preset mode to TWO PRESET using the MFK on Special Page 1 or by holding

down the SHIFT key and pressing the PRESET CONTROL key.

Set the A MASTER and B MASTER faders to zero.

The internal Time should be set to 0.0seconds, on Special Page 1.

Outputting a Scene

Set the required output levels on the PRESET A faders, then move the A MASTER fader

to full or set the required output levels on the PRESET B faders, then move the B

MASTER fader to full.

Manual Fading Between Scenes

The Crossfade Time should be set to 0.0 on Special Page 1.

Set the A MASTER fader to full, and the B MASTER fader to zero. Set up a scene using

the PRESET A faders. You will see this scene on stage. Set up a different scene on the

PRESET B faders. You will not see this scene on stage yet.

To crossfade to the scene on PRESET B, simultaneously move the A MASTER fader to

zero and the B MASTER fader to full. Note that the B MASTER fader is inverted, so this

action is from top to bottom on both faders. As the master faders are moved in tandem the

scene on PRESET B will fade in and the scene on PRESET A fade out.

To return to the scene on PRESET A, simultaneously move the A MASTER fader to full

and the B MASTER fader to zero. As the master faders are moved the scene on PRESET

B will fade out and the scene on PRESET A fade in.

In both cases above, the crossfade will be truely dipless and the speed of the crossfade

will be determined by the speed of movement of the A and B MASTER faders.

1 2 ... 75 76 77 78 79 80 81 82 83 84 85 ... 173 174

No comments

Zero88 FROG 2 Instruction Manual Page 80