Zero88 FROG 2 Instruction Manual download pdf (Page 88)

Programming

Page 88 Leap Frog 48/96 Operating Manual – Issue 3

Tagging Parameters

Fixture parameters must be ‘tagged’ for them to be recorded when programming

memories, submasters and palettes.

The tag status of each fixture parameter is indicated in the Program Window by it’s

background colour: grey = untagged; green = tagged, and also on the Wheel LCD: normal

video = untagged; inverse video = tagged.

If a parameter’s value is changed by moving the control wheel, applying a palette or

directly in the Program Window, it will be tagged automatically.

Tagging and untagging may be done at parameter, attribute or fixture level as follows:

Tagging at Parameter Level

Moving a control wheel automatically tags the corresponding fixture parameter.

Holding down the CLEAR key and moving a control wheel untags the parameter assigned

to that wheel.

Tagging at Attribute Level

To manually tag or untag all parameters of a particular attribute of the selected fixture(s),

carry out one of the following operations:

Hold down the CLEAR key and press the COLOUR key.

Hold down the CLEAR key and press the BEAMSHAPE key.

Hold down the CLEAR key and press the POSITION key.

Hold down the CLEAR key and press the EFFECTS key.

Tagging at Fixture Level

To manually tag or untag all the parameters of a particular fixture, carry out the following

operation:

Hold down the CLEAR key and press the corresponding Fixture Selection Key (MFK).

1 2 ... 83 84 85 86 87 88 89 90 91 92 93 ... 173 174

No comments

Zero88 FROG 2 Instruction Manual Page 88