Zero88 FROG 2 Instruction Manual download pdf (Page 105)

Memories

Leap Frog 48/96 Operating Manual – Issue 3 Page 105

Programming Memories

Programming a Scene Memory

Press the MEMORIES key to display the Memories Window. Select the memory number

to be programmed, if different to the one already selected - see Note below.

Set the levels of the dimmer channels using the preset faders.

Set the levels of the fixture parameters using the MFKs and control wheels.

Press the RECORD key.

• If the selected memory is unprogrammed – All the tagged data in the programmer is

recorded into the selected memory.

• If the selected memory is programmed – A warning is displayed on the monitor and

Main LCD with the following options: [Overwrite Scene], [Turn into Chase] and

[Cancel]. Select the [Overwrite Scene] option. All the tagged data in the programmer

is recorded into the selected memory, replacing the previous memory data.

The Next memory automatically increments. All the dimmer and fixture parameters are

untagged.

Note – Overwriting Memories

If the selected memory is already programmed – pressing the RECORD key twice, or

holding down the RECORD key for a second will overwrite the memory.

Note – Recording Full Memories

Holding down the SHIFT key and pressing the RECORD key will record all dimmers and

fixture parameters – a ‘full’ or ‘block’ memory.

Note – Recording a Memory if not on the Memories Window

If the Memories Window is not selected (active) and you press the RECORD key, the

Record popup window is displayed. Select the [Memory] option, if not already selected,

enter the required memory number in the field provided and click on the [OK] button.

1 2 ... 100 101 102 103 104 105 106 107 108 109 110 ... 173 174

No comments

Zero88 FROG 2 Instruction Manual Page 105